INNOVA 41H Plate Mounting Tape Log roll
The INNOVA 41H Flexographic Plate Mounting Tape is a high adhesive and medium hardness version for label printing, ensuring ideal printing results even for difficult and long print runs. The Innova 41H Plate Mounting Tape has a thickness of 0.38mm.
It is the right choice for all printing cylinders. Because it will hold the plates down and enables plate and tape removal at the same time. Especially if you are using a thin printing plate like 1.14mm.
The choice of the appropriate hardness depends primarily on the ink coverage of the printing plate. A mix of fine lines, solids and halftones with around 20-80% ink coverage requires a medium Plate Mounting Tape like Innova 41H. But for anything above 80%, it is recommended to use Innova 42H. Innova 41H is one level softer than the Innova 42H. However, we also suggest taking a look at the printing plate type. Hard printing plates may require softer tape, while other factors are the substrate and ink viscosity. On coated paper, for example, medium tapes will provide the best results. But with most label stock filmic materials, it is safer to use Innova 41H. As you know, Flexo Printing has few standards; we recommend a fingerprint test. A fingerprint test is the most scientific way to get to the right combination.
more info: www.innovaflexo.com
Share your thoughts with other customers