How to ensure a safe label press run

How to ensure a safe label press run by making the right choices?

9 · 27 · 21

No matter if you mount a few cylinders on your label press or up to 100 wide web sleeves a day. The mounting always has an impact on the print result. When preparing your sleeves and plates for the mounting there are just a few key factors. If you get them right, it will save a lot of trouble later on. Here we will look on the preparation of the sleeve before mounting the tape, so you can have a safe label press run.

Safe press run: Cleaning the sleeves or cylinders

In order to make a plate mounting tape stick to the surface you want to mount it on, the surface has to be clean. Clean means:

  • no adhesive residues
  • no liquid residues
  • no ink residues
  • no dust

The cleaning agent you want to use is Alcohol / Isopropanol. Or the same mixed with water 50/50. In case you insist on Ethyl acetate because you are in a hurry, that’s OK. But keep in mind to let it dry out after cleaning for at least 5 min.

Why is that important? – Sleeves usually have many tiny little scratches on their surface. The solvents that are used for cleaning sit in those tiny grooves and need time to evaporate. If a tape is mounted too early before solvents had dried out, the air gets trapped under the tape. Bubbles start to appear after 30-60min and the press operator won’t like that, right?

So here is the step-by-step workflow

Take the sleeve and clean it with solvent (or even better: clean sleeves right after press run and store them)

let solvents dry for 5 min

mount the tape by using a rubber blade or a pressure roller system in your plate mounter 

Sleeves are then ready for the next step – Plate mounting. But before we get into that, we’ll take a deep look at the tapes. Their characteristics and how to choose them based on the print parameters. That area is too large to cover in one post so we will approach it systematically be looking at:

These are some general tips for ensuring a safe label press run.

Read More about Flexo cushion backing foam: Special Nonwoven layer for corrugated printing

Related Posts

What are flexible Packaging Materials ?

What are flexible Packaging Materials ?

Understanding Flexible Packaging Materials in depth. Flexible packaging materials can be used for a wide variety of products, including foods and beverages, personal care items, toys and games, pharmaceuticals, and consumer goods.  It is easier to handle and more...

Flexo Printing Process Step by Step

Flexo Printing Process Step by Step

Printing products of high quality with flexo is a widely used printing process. Despite its simplicity, flexo printing requires meticulous adherence to specific steps in order to produce accurate prints. It is essential that the printing process be followed precisely...

Flexo Printing vs Gravure Printing

Flexo Printing vs Gravure Printing

There are scores of modern techniques for commercial printing. Flexographic printing and Gravure printing (Rotogravure) are the two printing methods that are on top of the list of modern printing presses. A person would be in a shadow of doubts when choosing between...

Comments

0 Comments

Submit a Comment