Innova 70 Plate Mounting Tape - 457 mm

Delivery options
  • 7 Days warranty
  • Days Cancellation Policy
  • Shippment And Pickup


Technical Specifications
  • Adhesion to plate : Standard
  • Adhesion to sleeve: Standard
  • Box size (L/W/H) : 50 x 19 x 19 (in cm)
  • Dimension (W/L): 457 mm x 25 m
  • Foam hardness : Soft Medium
  • Gross weight : 4.6 Kg
  • Net weight : 4.1 Kg
  • Paper core: 76 mm (3 inch)
  • Thickness: 0.55 mm (20 mil)

INNOVA 70 Plate Mounting Tape

The INNOVA 70 Flexographic Plate Mounting Tape is a standard adhesive and medium-soft version for wide web flexible packaging printing ensuring ideal printing results even for complex and long print runs. This Plate Mounting Tape has a thickness of 0.55mm.

Adhesion properties for Innova 70 

For printing cylinders with repeat lengths over 600mm, Innova 70 is the right choice because it will hold the plates down and enables easy plate and tape removal at the same time. Especially, If you are using a thin printing plate-like 1.14mm. That means for thicker plates and smaller sleeves the Innova 70H version is safer to use.

Printing properties for Innova 70

The choice of the appropriate hardness depends primarily on the ink coverage of the printing plate. Fine lines and ink coverage up to 20% require a soft Plate Mounting Tape like Innova 69. But solid areas with 100% ink coverage require a hard tape like Innova 73. Ink coverage of 20-60% is a suitable set-up for our Innova 70 Plate Mounting Tape. But if you are uncertain, it can be helpful to to try one level harder with our Innova 71. This will give you a perfect print performance at 30-70% ink coverage. The majority of press runs get ideal results with one of the three medium adhesive tapes. That is why most customers use Innova 70, 71 and 72. However, we also recommend taking a look at the printing plate type. Hard printing plates may require softer tape. Other factors are the substrate and ink viscosity. On uncoated paper, soft tapes will provide the best results. But with PE-film, it is safer to go with medium hardness. Because Flexo Printing has few standards, we recommend a fingerprint test. The fingerprint test is the most scientific way to get to the right combination. 

General recommendations for INNOVA 70 Mounting Tape

Processing our tapes is very simple, but it always works best on cleaned surfaces. For safe use without lifting the plate edges, try using masking tape on the plate edges. Download our "How to use" guide here.

Payment Policy

Standard Marketplace Policy

Delivery Policy

Standard Marketplace Policy

Refund Policy

Standard Marketplace Policy

Customer reviews

Share your thoughts with other customers

Be the first one to write a review!
Items (0)
No Record Found

Your Shopping Bag Is Empty